This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA

The Air Chair® by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair®is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair®& Air Barstool®/em>

Air Chair®Comparison (Siesta vs Copy/Replica):

The copy is not UV stabilised or resistant and will fade in direct sunlight
The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
The copy is not CATAS tested

Features

5 year warranty
Stackable up to 4 high
Suitable for indoor and outdoor commercial use
Made of UV stabilised polypropylene reinforced with glass fibre
Dimensions: 500W x 600D x 820H x 450 Seat Height
Unit Weight: 3.7kg
SWL: 150kg
Supplied assembled
Weather resistant, UV Stabilised, Glass fibre reinforced
Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
Replaceable feet
CATAS Tested
Matching Products: Air XL Armchair® Air Barstool®/li>
Made in Europe
Product Brochure

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Video & Assembly

Test Results

Tests Completed

1. Outdoor furniture - General safety requirements EN 581-1:2006
2. Seat and back static load test EN 1728:2000
3. Seat and back fatigue test EN 1728:2000
4. Leg forward static load test EN 1728:2000
5. Leg sideways static load test EN 1728:2000
6. Seat impact test EN 1728:2000
7. Stability - EN 1022:2005

Seat & Back Static Load Test

Seat Load (kg)	Back Force (kg)	Number of Cycles
204	57	10 x 10s
204	57	1 x 30 min

Seat Front Edge Static Load Test

Seat Load (kg)	Number of Cycles
132	10

General Safety Requirements

Edges of seat, back rest and arm rests rounded and chamfered
All other parts: free from burrs, sharp edges and sharp points.

Tubular Components Safety Requirements

Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm

Shear & Squeeze Points Safety Requirements

Absence of shear and squeeze points, created by loads applied during normal use.

Conformity to requirements of clause 5 of standard EN 581-1

WOW0821240209BLCLJLLLML